|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
;
Veramente completo, dettagliato e perfetto nella visione. Perfect, thanks!
LC-37HV6U
Noise is caused to the moving picture when the QS drive is set to ON.
Is OSTEMP.AD on the 3rd page of the process adjustment mode set to 255? YES Is the harness connected correctly between the Thermistor PWB and Inverter-4 PWB? YES Is the board-to-board connected correctly between the Inverter-3 PWB and Inverter-4 PWB? YES Is the harness connected correctly between the Monitor PWB and Inverter-3 PWB? YES Is the input voltage on pin (2) of IC2004 (microprocessor) 5V? YES TH6301 thermistor is faulty.
No
Check IC4701 and IC4901 and the peripheral circuitry.
No
Connect the harness correctly or replace it.
No
Connect the board-toboard securely or replace it.
No
Connect the harness correctly or replace it.
No
Pin (2) of IC2004 (microprocessor) is faulty.
51
|
|
|
> |
|
